Sprenger Copper Training Bit

Product no.: Sprenger 40951 kupfer

44.95 €
(1 piece(s) = 44.95 €)
incl. VAT, plus delivery

Description

Sprenger Copper Training Bit

sizes: 115mm, 125mm, 135mm, 145mm

double broken mouthpiece, strength 16mm

conventional double broken water snaffle

Approved for all types of tests with bridle on snaffle according to LPO approval

Bit width of water snaffle: When correctly buckling bits with through-running rings (water snaffles), there should be no more than 0.5 cm space on the right and left between the mouth angle and the bit ring, measured without taking up the rein. The ring should always be free to move and must not pinch the mouth angle.

The bit shanks of conventional single-broken bits are always of different lengths for manufacturing reasons, which means that a little more pressure is always exerted on one side. It is therefore recommended to regularly turn over single-broken bits.

Bits with continuous rings act exclusively on tension. When the reins are pulled, the pressure is transferred to the lower jaw via the tongue. Any pressure on the neck is not caused by the bit, but by the noseband. The movable rings can cushion or compensate for an unsteady or inexperienced rider's hand to a small extent. In addition, the horse can lift the bit a little by tightening the tongue and thus avoid too much pressure by pulling the reins for a short time.Basically, ring snaffles are suitable for every horse and every level of training and are also recommended for breaking in young horses or for beginners.